Gardner Denver oil-free air compressor 16 bar pressure optimal solution for Lazer machine
Specifications |
Detail |
|---|---|
| Brand | Gardner Denver |
| Origin | Federal Republic of Germany |
| Capacity | 22 – 132 kW |
| Pressure | up to 16 Barg |
| Flow | 0.8 – 15.5 m³/min |
| Product type | Screw air compressor |
| Control type | Inverter |
| Lubrication type | No oil |
| Cooling type | Cooling with Water |
16 bar air compressor for Lazer machine Gardner Denver brand is the line no oil Flooded is a standard product, meeting the technical solutions required by factories using laser machines, including ensuring clean, oil-free gas, safety and stable operation.
Advantage
- Save energy.
- Meets Class 0 standards.
- Guaranteed to be oil-free with any air compressor problems.
- Water cooling is a step forward in reducing sound pollution in the work environment.
New generation compression head technology is better completed:
- The screw is made from stainless steel and copper alloy.
- High-quality bearings, made from special ceramics, ensure reliable water lubrication, high performance and low noise.
- Because the compressor has no metal-to-metal contact parts, the screw acts as a balanced force, providing maximum performance and long life.
Start up
- There is no inrush current peak.
- Save energy when reducing load.
- Light load on electrical parts does not affect the system.
- Smart control provides flexibility in areas with unstable power lines.
- The starting torque of the engine is low, resulting in small collisions on the mechanical parts, thus prolonging the life of the mechanical parts (bearings).
- Converts torque as required, without wasting energy.
The water system is controlled completely automatically
- The water purification system is equipped with a clean water generator, water filter and water-air separator to provide high purity water for cooling during lubrication.
- The design of the chiller and water purification system integrates a soundproof structure.
- Pure water used for lubrication is always circulated in the system, and the water will be automatically rotated according to preset times. The operating temperature of the device is limited to not exceed 50 degrees Celsius, to ensure water quality inside the device and prevent fouling problems.
Output pressure is stable
- The inverter control can maintain a pressure range within 0.1 bar, so there is no need to use a large air tank.
- The pressure will not exceed the required value, causing no waste of energy.
Technical specifications of GDK series specialized for Lazer machines, working pressure 16 bar
Inverter / Air-cooled series
