Today, in the food, medical, electronics industries, etc. For products related to human health, it is imperative that the output compressed air is clean and meets standards. With over 100 years of research and development. Kobelco Japan Corporation has launched the most optimal products with Kobelco air compressor Oil-free Emeraude ALE series according to German TUV standards & ISO 8573-1 Class 0 compressed air standards creates 100% clean, oil-free compressed air.

Optimal energy efficiency, reliable compressed air quality

• Significantly reduces total power consumption.
• Kobelco air compressors are Class 0 oil-free certified.
• Durable, long overhaul cycle.

Feature

Superior compressor head with over 60 years of history in oil-free technology, the rotating shafts are coated with teflon coating on the first layer, and the second surface is coated with stainless steel, helping to enhance corrosion resistance , durable and high performance.

Save energy with water cooling system

• The plate design of the water cooler can reduce pressure loss by up to 1/5 compared to a conventional cooler.
• Minimizes silicon buildup in the water chamber.

Control and stabilize pressure with inverter lines

Logical energy saving for non-inverter models (as well as FE series)
Controlling and stabilizing the pressure of the inverters helps lower the pressure. And the pressure fluctuation is kept within 0.01MPa which saves energy, which forces the non-inverter line to switch to idle mode at every cycle to control capacity (minimum 23 seconds). . Eliminates excessive pressure build-up and minimizes energy loss.

Class 0 certification

KOBELCO air compressor has received Class 0 certification (ISO8573-1 [-: -: 0]) for the Emeraude ALE Series from the TÜV International testing institute, certifying the highest level of purity for the quality classifications of compressed air.

Long equipment life

The Emeraude ALE series, thanks to the high durability of its bearings, helps reduce the time the machine needs to complete the overhaul cycle Kobelco air compressor lâu hơn.

Kobelco Air Compressor User-friendly LCD controller design

This display can be used not only to monitor operating conditions but also to set discharge pressure, etc. … Activity recording, graphic display, weekly timer, daily reporting and weekly report management.

• Operational data can be output via “Modbus” (optional).
• The controller's front panel is complete with a waterproof specification equivalent to IP65.

SPECIFICATIONS KOBELCO OIL-FREE AIR COMPRESSOR

* Because the cooling of the compressed air and inside the compressor depends on the surrounding air conditions. The surrounding air must be properly ventilated to avoid the ambient temperature rising above 45°C.

* Be sure to use lubricating oil recommended by KOBELCO.

* Keep water temperature below 35°C for water-cooled models.

* Please refer to standard technical guidance on water quality.

* Specifications and appearance are subject to change without notice

Contact us if performance guarantees are needed. The starting system of the fixed speed model is Star-Delta.

* Suction conditions Absolute suction pressure: 0.10MPa, Suction temperature: 20 ° C, Humidity: 0% RH.

* Exhaust gas volume is converted to suction conditions.

* Discharge pressure is measured after the compressor's check valve.

* Noise parameters are measured 1.5m from the front of the machine and 1m from the floor in an anechoic room. When the machine is operating at full load.

* Air produced by the compressor must not be used in respiratory equipment equipped with air for direct inhalation.

* The normal working pressure at 0.75MPa is 0.70MPa.

* The normal working pressure at 0.86MPa is 0.80MPa.

* The normal working pressure at 1.0MPa is 1.0MPa.

Phuc Hung – Air compressor Kobelco